5.2 Printing Stored Measurements
The 978 has the ability to output stored measurement data directly to a
serial printer or computer. The printout format options in Section 7.3
dictates what format data is output during a printout. Individual groups or
all measurements can be printed.
To print stored measurements:
1) Refer to Section 7.2 and 7.3 to set
I/O and Printout Options.
2) In Storage Mode, press the [REF]
(group) key.
- The [SETUP] (del) key can be
pressed if all groups are to be
printed.
3) Press the [SETUP] (next) key to
select individual group to print-out.
4) Press the [FUNCTION] (del) key to
enter "PRINT DATA" menu.
5) Select printout type (single or all).
- Press [SETUP] (single) key to
printout selected group data. Press
[REF] (all) key to printout all stored
data.
6) Press the [FUNCTION] (no) key to
save stored data. Press [REF] (yes)
key to clear stored data from the
instrument.
☛
Refer to Section 5.3 for additional information on
deletion procedures.
5-3
DATA STORAGE
FUNCTION SETUP REF
ON/off
del
group
DATA GROUP 1
FUNCTION SETUP REF
edit
next
exit
SELECT
GROUP
PRINT DATA ?
FUNCTION SETUP REF
no single
all
SEC.
5.3
PRINTING GROUP
# OF #
PRINTING GROUPS
# OF #
CLEAR DATA ?
FUNCTION SETUP REF
no yes
