EPSON Stylus Color 900 Revision C
Adjustment Adjustments 152
27. The following screen appears.
Figure 5-41. Screen after the Adjustment Value has been Written
28. To execute the adjustments, press the ESC key 5 times. The printer
turns off and back on in an instant and the adjustment values are
stored in the EEPROM. If you need to check the adjustment results,
perform the following operation.
1. Market Destination Check:
Press the ESC key twice and select “Market Destination
Check” from the menu.
2. Print A 4 Pattern:
Press the ESC key three times and select “Print A4 Pattern”
from “SERVICE ITEMS”.
NOTE:
Bi-Directional Adjustment is the last adjustment to be made on the
program. Never perform adjustments such as “Head Angular
Adjustment” and “Head Actuator Voltage ID Input” after “Bi-
Directional Adjustment”. (Refer to Table 5-1 for details.)
ESC: Previous
As the variable-1 Dot data, +4 has been written in EEPROM .
Normal Dot Bi-D adjustment
