Epson SEIJ98006 Manual

A SERVICE OF

next previous

EPSON Stylus Color 900 Revision C

Disassembly and Assembly Disassembly Procedures 123

4.2.7.9 Encoder Belt Sensor Removal

1. Remove the printer mechanism. (See Section 4.2.2.)

2. Using your hand, push the fixing lever holding the encoder belt by

the left end to the right, then remove the encoder belt when the

encoder belt is released enough.

Figure 4-37. Encoder Belt Removal

Fixing Lever

Encoder Belt

(Linear Scale)

CAUTION

When installing the encoder belt, be sure to place it

between the flags for the photo sensor attached to the

back of the carriage unit. Failure to do so will bring a

fatal error at power on.

Figure 4-38. Positioning the Encoder Belt

Linear Scale

(Encoder Belt)

Encoder

Carriage Unit