A SERVICE OF

logo

© Adam Equipment Company 2011 Page
25
“UnI t” ” KG/ Lb”
kg/ lb both are enabled
”UnI t” “KiLo”
kg only is enabled
Un I t
”UnI t” “Lb”
lb only is enabled
Print Au oFF
Prints only when
the Auto-
Accumulation is
set to off.
Au on
Prints only when
the Auto-
Accumulation is
set to on.
P Cont
Sets the RS-232 interface
to print continuously and
the accumulation function
is disabled.
P Mo dE
SEr r E
Sets the RS-232 to print
continuously the weight
only.
P bAU d b 600
b 1200
b 2400
b 4800
b 9600
b 19200
Sets the required baud
rate (speed for the RS-
232 communications).
Default rate is 4800.
F2 Prt
PAritY 8 n 1
7 E 1
7 o 1
8 data bits, no parity
7 data bits, even parity
7 data bits, odd parity
F3 U id “USE id”
“ Abc234”
“ “
Shows the current user ID (if any).
Enter a new User ID as described in the Description
under the PLU section. The ID can be alpha-
numeric but is limited to 6 characters.
F4 S id “SC id”
“ Abc678”
“ “
Shows the current scale ID (if any).
Enter a new Scale ID as described in the
Description under the PLU section. The ID can be
alpha-numeric but is limited to 6 characters.
tECH
Allows access to the Technical parameters using a
password. Not normally accessed by user. See
Section 12.