© Adam Equipment Company 2011 Page
24
7.0 PARAMETERS
The following parameters set up the scale as required by the user. For the
Technical parameters and configuring the remote platform refer to Section
12.
Enter the User Parameters section by pressing the [Pst] key during the self-
test when the power is turned on or press and hold the [Pst] key for 3
seconds during normal operation. This will allow the user to set the way he
wants the scale to work by choosing specific values from some options.
• Press the [U.Wt./Units] key to scroll through the main parameters. To
enter any parameter, press the [Print] key.
• Press [U.Wt./Units] to scroll through the sub-parameters. To see the
earlier setting, press the [Print] key. To change and scroll through the
other available settings, press [U.Wt./Units]. To choose the desired
setting and thereby go back to the sub-parameter, press the [Print]
key.
• To return to the parameter, press the [Tare/Zero] key.
PARA-
METER
SUB-
PARAMETER
DISPLAYS AND SETTINGS
“bEEP"“ "oFF"”
Beeper is set to off
“bEEP"” "on In "”
Beeper is set to on
between limits
bEEP
“bEEP” “"on oUt” ”
Beeper is set to on
outside limits (>0)
“LitE"” “"oFF"”
Backlight is set to off
“LitE"” "on"”
Set to on
at all times
F1 oFF
EL
“LitE"” "AUt"
Set to work automatically
when a weight is placed
on the scale or a key is
pressed.
