Sony PSP-1001 Video Game Console User Manual


 
15
US
Precautions
Pouch and wrist strap
If you want to pause or temporarily store the system while playing games or
video, put the system in sleep mode before placing it in the pouch. This may
help to avoid overheating.
Put both the PSP™ system and the remote control in hold mode to help
prevent unintended operation.
Keep the pouch and wrist strap out of the reach of small children.
Never disassemble the system or supplied accessories
Use the PSP™ system and accessories according to the instructions in this
manual. No authorization for the analysis or modification of the system, or the
analysis and use of its circuit configurations, is provided. Disassembling will
void the system warranty. Additionally, there is a risk of fire, electrical shock
or malfunction. The LCD screen, in particular, contains dangerous, high-
voltage parts, and the laser beam for reading UMD™ may cause visual
impairment if exposed directly to the eyes.
Overseas use
Depending on the country, there are limitations on the use of certain types of
radio waves. In some cases, use of the system may lead to a fine or other
penalty.
Moisture condensation
If the PSP™ system or UMD™ is brought directly from a cold location to a
warm one, moisture may condense on the lens inside the system or on the
UMD™. Should this occur, the system may not operate properly. In this case,
remove the UMD™ and turn off and unplug the system. Do not put the UMD™
back in until the moisture evaporates (this may take several hours). If the
system still does not operate properly, contact our technical support line at
1-800-345-7669 for assistance.
UMD™ handling
Do not touch the opening on the rear of the disc (recorded surface of the disc)
with your fingers.
Do not allow dust, sand, foreign objects or other types of dirt to get on the
disc.