SkyLink AM-002/ML-001 Video Game Controller User Manual


 
7
Door/Window Sensor (WD-101)
- Magnetic Contact Sensor
- For all doors or windows
- Batteries included
Repeater (RP-434)
- Extend the operation range between 2 wireless devices,
such as any sensors and control panel
- Doubles the operation range automatically between
sensors and control panel
Water Sensor (FS-101)
- Alerts you when water is detected
- Ideal for water detection in basement, under the sink, even
bathroom
Garage Door Monitor
TM
Sensor (GS-101)
(Available in US and Canada)
- Monitors your garage door
- Alerts you when the garage door is left open
Garage Door Monitor
TM
Sensor (GS-102)
(Available outside US and Canada)
- Monitors your garage door
- Alerts you when the garage door is left open
Indoor/Outdoor Motion Sensor (PS-101)
- Monitors area in a 110 degree ARC and up to 40 feet away
from the sensor
ACCESSORIES
Additional sensors and transmitters as well as add on accessories are available
to work with your system.
TM
46
INSTALLATION
Installing the Console
It is important determine where the control panel will be located. Please follow
the criteria below to select the ideal location for the control panel.
- Place it where electrical outlet and phone line can be accessed
- Place it where it is easily accessible by the users
- Place it away from any doors or windows which could be accessed by
non-intended users
- Place is away from extreme temperature sources such as oven, stove
and away from large metal objects which could affect the wireless
performance
After a location has been selected, you may begin the installation and connect all
the necessary wires and power up the unit.
1. Undo the 2 screws on the battery cover.
2. For models support multiple languages,
select the desired language based on
the setting below:
1. German
2. Spanish
3. French
4. English
3. Connect the power adapter to the
socket inside the battery compart-
ment. The power adapter should
be connected to an AC electrical
outlet. You should see all LEDs
turn on, LO BATT LED should be
off.
Language
selector