Filter
Top Products
Making calls using the headset
23 | D 10 series
Calling via the fixed line phone using the headset
Establishing/disconnecting a wireless link
If you want to use the headset to accept, make or end calls, you have to
es
tablish a wireless link between headset and base station. You can choose
between manual and automatic link establishment (see “Auto Link” on
page 17).
̈ Press the Link button on the headset.
–
The link is established. The Link LED on the base station lights up
blue and the Headset LED flashes blue slowly.
OR
– The link is disconnected. The Link LED on the base station and the
Hea
dset LED go off. The headset is in standby mode.
Managing calls without using a call control f
unctionality
Accepting a call: Y
ou hear the ring tone of the fixed line phone. Press the
Link button on the headset. Lift the handset or press the “accept call”
button on your fixed line phone.
Making a call: Press the Link button on the headset to establish a link
between base station and headset. Lift the handset and dial the desired
number. The phone connection is established.
Ending a call: Hang up the handset or press the “end call” button on your
fixed line phone.
If your telephone has a built-in electronic hook switch supporting
the MSH standard, you can only disconnect the wireless link between
headset and base station by placing the headset into the base
station.
disconnectedconnected disconnectedconnected