Filter
Top Products
Making calls using the headset
D 10 series | 22
Muting the headset’s microphone
̈ Press the Audio button.
The microphone is muted. While the microphone is muted, the
Link LED on the base station flashes red.
Unmuting the headset’s microphone
̈ Press the Audio button.
Y
ou hear a beep in the headset. The muting is canceled and the
Link LED on the base station lights up blue.
If you leave the DECT range
In normal office buildings, the range between headset and base station is
up to 55 m. If, during a call, the audio quality deteriorates or the link breaks
down completely, you hear a descending sequence of beeps in the headset.
The Link LED on the base station lights up red.
̈ Re-enter the DECT range of the ba
se station within 60 seconds.
You hear a ring tone in the headset.
̈ Press the Link button on the headset to resume the call.
I
f your softphone supports call control, the call will automatically be
ended 60 seconds after leaving the DECT range.
55 m