Filter
Top Products
Configuring the headset system
19 | D 10 series
Adjusting the volume of the transmission
Adjusting the microphone volume of the call transmission
By default, the microphone volume cont
rol is set to position 4. This setting
is suitable for most telephones.
̈ Make a call to someone who will help you find t
he correct sensitivity
setting for your microphone.
̈ Turn the microphone volume control so that the other party can hear
yo
u at a comfortable level.
Adjusting the microphone volume of the USB transmission
Some softphones adjust the microphone sens
itivity automatically.
̈ Activate this function in order to be able to optimally use the
mi
crophone and, via your operating system, adjust the microphone
sensitivity so that the other party can hear you at a comfortable level
(see the Help function of your operating system).
Adjusting the volume of the ring tone
Adjusting the headset‘s ring tone volume and the volume of the acoustic
signals
̈ Make sure that the headset is in standby mode (the Link LED on the
base station is off).
If necessary, press the Link button on the headset.
̈ To adjust the volume, move the Audio button as shown in the diagram.
Wh
en the minimum or maximum volume is reached, you hear a double
beep in the headset.
Adjusting the ring tone volum
e of the base station
̈ Turn the volume control to reduce or increase the ring tone volume.
Mic. Volume
Settings
Mode
0
3
6
9
1
A
B
C
2
3
4
5
6
&
Ring Volume
Setti
n
gs
0
3
6
9
1
2
3
4
5
6
Ring Volume