Filter
Top Products
U
SING
P
RINT
M
ATERIALS
3.23
3
Printing on Preprinted Paper
Preprinted paper is paper that has some type of printing placed
on it before it is sent through the printer (paper that has a
preprinted logo at the top of the page, for example).
1
Load letterhead into the tray you want to use, as shown in
the figures below. Adjust the guides to fit the width of the
paper stack.
Guidelines
• Letterheads must be printed with heat-resistant ink that will
not melt, vaporize, or release hazardous emissions when
subjected to the printer’s fusing temperature of 400 °F
(205 °C) for 0.1 second.
• Ink on letterheads must be non-flammable and should not
adversely affect any printer rollers.
• Forms and letterhead should be sealed in a moisture-proof
wrapping to prevent changes during storage.
• Before you load preprinted paper as forms and letterhead,
verify that the ink on the paper is dry. During the fusing
process, wet ink can come off preprinted paper.
Load with the design face
down, bottom edge
towards the printer.
Load with the design face
up, top edge towards the
printer.