Filter
Top Products
S
ETTING
U
P
Y
OUR
P
RINTER
2.13
2
For Network Printing
You can attach your ML-2251N or ML-2252W printer to a
network using an Ethernet cable (UTP cable with RJ.45
connector).
The ML-2252W also has a network antenna which allows you to
use a wireless LAN interface.
If you are an ML-2250 user, you need to install the optional
network interface card. For an ML-2251N printer, you can
replace the network interface card with one supporting the
wireless LAN interface. For details about installing the card, see
page D.7.
1
Make sure that both the printer and the computer are
turned off.
2
Plug one end of the Ethernet cable into the Ethernet
network port on the Printer.
3
Plug the other end of the cable into a network LAN
connection.
See your computer User’s Guide, if you need help.
To the network LAN connection