Filter
Top Products
I
NSTALLING
P
RINTER
O
PTIONS
D.12
4
Align the printer with the support unit and lower it into
place on the tabs.
5
Plug the cable into the connector on the back of the printer.
6
Load paper in Tray2. For information about loading paper in
the tray, see page 2.7.
7
Reconnect the power cord and cables and then turn the
printer on.
N
OTE
:
When you print a document, configure the printer driver
from your application. To access the printer driver, see page 4.2.
C
AUTION
:
Do not remove Tray 1 from the printer while you are
printing using the optional Tray 2. If you do this, a paper jam may
occur. Use the optional Tray 2 with Tray 1 in place.