Filter
Top Products
S
OLVING
PROBLEMS
6.20
Troubleshooting Error Messages
When the printer experiences an error, the control panel will
indicate an error message with the indicator lights. Find the light
pattern below that matches the printer light pattern and follow
the solutions to clear the error.
LED status legend
LED pattern Possible Problems and Solutions
Your system has some problems. If this
problem occurs, contact your service
representative.
On Line/Error
LED lights red
• A paper jam has occured. To solve the
problem, see “Clearing Paper Jams” on
page 6.7.
• Paper Tray is empty. Load the paper in the
Tray.
• The front cover is open. Close the front
cover.
• The toner cartridge is empty. Remove the
old toner cartridge and install a new one.
See “Installing the Toner Cartridge” on
page 2.4.
• You pressed the
Cancel
button while the
printer was receiving data.
• In Manual Feed mode, there is no paper in
the Multi-purpose Tray. Load paper into the
Multi-purpose Tray.
• If the printer is receiving data, the
On
Line/Error
LED slowly blinks green.
• If the printer is printing the received data,
the
On Line/Error
LED blinks green fast.
symbol for “light off”
symbol for “light on”
symbol for “light blinking”