Filter
Top Products
Siemens: HiPath Wireless System with 2610, 2620 APs
PN: 1725-36071-001_C.doc
9
Assigning routing protocols to a wireless controller
1. In the Wireless Controller screen, click Routing Protocols in the
navigation pane.
2. Enter
0.0.0.0 for the Destination Address and 0.0.0.0 for the Subnet
Mask
. Add the appropriate address for the Gateway.
3. Click the
Save button.
If dynamic routing (OSPF) is being used, then the default route
should be set automatically. However, it is always recommended
that you assign a temporary static route in dynamic environments to
allow the device to operate immediately without having to wait for
the initial updates. Be sure to clear the check box for Override
dynamic routes. This will allow dynamic routes to be the default once
they arrive.