Filter
Top Products
Configuration Guide
PN: 1725-36071-001_C.doc
12
Setting up SSID, Security and QOS
1. Click the VNS Configuration button.
2. Click the
Topology tab.
3. Assign a subnet for clients for a specific
SSID.
4. Under
DHCP Settings:
a. Enter the appropriate address for the
Gateway
b. For
Mask enter 255.255.255.0.
c. The address range should default to
192.168.121.2 –
192.168.121.254. Change this if you want a limited range of
addresses assigned to this subnet.
d. No DNS Servers or WINS is required.
5. Set the
Timeout Idle: pre and post to 2.
6. Under
Next Hop Routing, set the OSPF Route Cost to 50000.
7. Enter an SSID name.
8. Under
Wireless APs, select the b/g check box for each AP.
9. Click the
Save button.