Filter
Top Products
Siemens: HiPath Wireless System with 2610, 2620 APs
PN: 1725-36071-001_C.doc
19
Wireless APs address assignment
1. After all the APs have been connected and discovered by the
controller, click
Wireless APs tab.
2. Click the
Static Configuration tab.
3. Select an AP to configure. The AP’s name will default to their
MAC address.
4. Under
IP Address Assignment click either the Use DHCP or the Static
Values
option. If selecting Static Values, assign the proper values.
5. Under
Wireless Controller Search List add the IP address of the
controller port.
6. Repeat steps 4 and 5 for each access point.
7. Click the
Save button.