Filter
Top Products
Configuration Guide
PN: 1725-36071-001_C.doc
22
Enable the radio
1. Click the VNS Configuration button.
2. Click the
Topology tab.
3. Enable each AP’s b/g radio for each SSID.
4. Set
No. of Retries for Voice VO to adaptive (multi-rate) and No. of Retries
for Turbo Voice TVO
to 2.
5. Click the
Save button.
After the controller and access points are set up, the Management
port is no longer required. The Controller can now be managed
through the Host Port, or the esa0 port in this configuration. Open a
browser and connect to https://<ip address>:5825.