Filter
Top Products
OPS1200 User’s Manual
16
HPOS (OPS1200 Display and Keyboard Only)
Move the horizontal cursor position
Format: HPOS {value}
Group: Character I/O
Units: none
See also: VPOS, OPEN
This command moves the horizontal position of the cursor on the LCD screen after
evaluating the expression. The value is a number from 0 to 39, in increments of 1. A
“0” will place the cursor at the extreme LEFT of the 40 character screen.
Note that this command will only work if the OPS: device has been opened using the
“OPEN” command.
The following example sets the cursor position to character space 2 from the left:
Usage example:
HPOS 1