Filter
Top Products
Chapter 2, OPS1200 Firmware Command Set
11
CHAPTER 2
OPS1200 FIRMWARE COMMAND SET
This document provides additional command information for the Acroloop OPS1200 Display
and Keyboard not currently included in the Acroloop Motion Controller User’s Guide Part I.
Refer to the Acroloop Motion Controller User’s Guide Part I for a complete listing of
commands available for use with the ACR1200 Motion Control Board. The following
commands are available in the User’s Guide and may be useful when programming with the
OPS1200 interface:
CLOSE Close a device.
INPUT Receive data from a device.
PRINT Send data to a device.