Filter
Top Products
Safety IW4/IW7 WB/WBV
12 D1 0412BA1-GB04
2.9 Safety Features
The safety features are to be inspected regularly by an authorized service technician.
(recommended interval: 12 months). Official guidelines should be followed at all times.
The test stand may not
be operated when the safety features are defective.
2.9.1 Lockable Main Switch
Serves as normal On and Off switch for the test stand as well as an EMER OFF switch.
The switch can be secured against unauthorized switch on by using a padlock.
2.9.2 Sensor Rollers (Brake Tester)
Both sensor rollers must be pressed to start the roller brake tester.
The RPM difference between sensor rollers and test stand roller determines the slip. If the
preset slip is reached the roller drive switches off.
2.9.3 Pit Safety (Option)
Light barrier or infrared movement sensor. Prevents the test stand from starting up when
persons are in the pit.
2.9.4 Warning and Information Labels
Warning and information labels are attached to the MAHA test stand. The labels may not be
changed or removed. Unreadable labels must be replaced.