Filter
Top Products
IW4/IW7 WB/WBV Description
D1 0412BA1-GB04 7
1.3.3 Electronic
Processor PCB with operating system
EEPROM for variable system configuration
6 Slots for system expansion
Serial interface RS 232
Connection for LCD-Display
Subject to technical alterations without notice!
Only trained electricians or authorized service technicians are allowed to carry out work on
electrical parts of the brake tester. (Control box, roller set, etc.)
1.4 Standard Equipment IW4/IW7 WB/WBV (4WD)
IW4 (4WD): Roller set no.1 or no.2
IW7 (4WD): Roller set no.2
Single wheel mode
Delayed automatic switch on
Automatic switch-off after exiting the roller set
Automatic slip switch-off including pointer stop and automatic re-start
Electronic strain gauge
Lockable main switch
RS 232 Interface
Optional:
Weighing system; static (2 pressure cells) or dynamic (4 pressure cells)
Standard equipment subject to change without notice.
Standard equipment of the current price list apply.
In addition to the standard versions, Maschinenbau Haldenwang (MAHA) offers various expansion possibilities which
are listed in the current price list.
1.5 Noise Emission
The noise emission value created when the tester is in operation is less than 70dB(A) in the
work area of the operational personnel.