Filter
Top Products
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3
Cisco 6100 Series User Guide 3-19
One-to-One Cables
You can use one-to-one cables to connect the PSC to the MDF or external voice equipment.
Table 3-10 lists the backplane connectors, the available cable lengths, and the part numbers for the
one-to-one cables connecting the PSC to the MDF in a DOH configuration. Each cable has the same
pinouts. The only difference between the four cables is the length. Use thelength that works best for
your configuration.
Figure 3-18 shows the one-to-one cable described in Table 3-10.
Figure 3-18 One-to-One Cable
Figure 3-19 shows the cabling between the PSC and the MDF in which the cables listed in
Table 3-10 are used.
Figure 3-19 PSC to MDF Cabling Diagram with One-to-One Cables
Table 3-10 Connectors, Lengths, and Part Numbers for One-to-One Cables—PSC to
MDF Connections
Backplane Connector Cisco Part Number
PSC Kit Subassembly
J11, J12, J13, J14
or
J7, J8, J9, J10
CAB-61-015
50-ft cable
72-1599-01
CAB-61-016
150-ft cable
72-1598-01
CAB-61-017
75-ft cable
72-1597-01
CAB-61-018
175-ft cable
72-1596-01
23704
P1
P2
27318
MDF
connections
J3
J4
J8
J14
J2
J6
J10
J13
J36
J7
J11
J1
J5
J9
J12
MDF
connections
Cisco 6120