Filter
Top Products
Technical Information
Q-Spot™ 560-LED User Manual Rev. 06 -23-
5. Technical Information
Product
Maintenance
To maintain optimum performance and minimize wear, the user should clean this product
frequently. Usage and environment are contributing factors in determining the cleaning
frequency.
As a rule, you should clean this product at least twice a month. Dust build up reduces light
output performance and can cause overheating. This can lead to reduced light source life
and increased mechanical wear.
To clean a product, follow the recommendations below:
Unplug the unit from power.
Wait until the unit has cooled.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external vents and accessible internal components.
Clean all external glass lenses with a mild solution of non-ammonia glass cleaner or
isopropyl alcohol.
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
Drag any dirt or grime to the outside of the glass lens.
Gently polish the glass lens until it is free of haze and lint.
Always dry the external glass lens carefully after cleaning it.
Refrain from spinning this product’s fans using compressed air.