Filter
Top Products
Setup
-10- Q-Spot™ 560-LED User Manual Rev. 06
Mounting
Before mounting this product, read and follow the Safety Notes in the Before You Begin
chapter of this manual.
Orientation
Always mount this product in any safe position while making sure that there is adequate
room for ventilation, configuration, and maintenance.
Rigging
CHAUVET® recommends following the general guidelines below when mounting this
product.
When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes section.
Never mount the product in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
If hanging this product, make sure that the mounting location can support the product’s
weight. Please see the Technical Specifications section of this manual for the weight
requirement of this product.
Procedure
The Q-Spot™ 560-LED comes with two (2) omega brackets to which you can attach
clamps. You must supply your own clamps. Make sure the clamps are capable of
supporting the weight of this product. You must use two mounting points per unit.
Product Mounting
Diagram
Omega Brackets
Safety Cable
Floor Mounting
Overhead Mountin
g