Filter
Top Products
Operation
Q-Spot™ 560-LED User Manual Rev. 06 -13-
Keylock
Locks or unlocks the product’s display.
1. Go to MENU > INTRO > KEYLOCK.
2. Select YES or NO.
When Keylock is in the YES setting, you will have to enter the password after 30
seconds of control panel inactivity or each time you turn the product on.
The default (non-modifiable) password is
<UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>.
Reset
Reset all custom settings to their default values.
1. Go to MENU > INTRO > RESET
.
2. Select YES or NO.
Dimmer Curve
This option defines the output speed when you modify the dimmer fader values. You have
four different options to simulate the dimming curve of an incandescent lighting product.
1. Go to MENU > INTRO > DIMMER
.
2. Select DIMMER 0~4.
DIMMER 0:
The output is proportional (linear) to the dimmer channel.
DIMMER 1~4:
The output follows the dimmer channel values based on the
corresponding dimmer curve, being DIM1 the fastest and DIM4 the
slowest.