Filter
Top Products
Operation
-12- Q-Spot™ 560-LED User Manual Rev. 06
Stand-alone
Operation
1. Go to MENU > INTRO > RUN.
2. Select a stand-alone operation mode (AUTO 1, AUTO 2, CUSTOM, SOUND 1,
SOUND 2, or TEST).
Of all the stand-alone operation modes indicated above, only CUSTOM is editable
(see Edit Custom).
Master/Slave
The Master/Slave mode enables one or more Q-Spot™ 560-LED products (the slaves) to
simultaneously duplicate the output of another Q-Spot™ 560-LED (the master), without a
DMX controller, whether in auto/custom or static modes,.
1. Set the master unit
:
a) Select a stand-alone mode, as indicated above.
2. Set each of the slave units:
a) Go to MENU > INTRO > RUN.
b) Select SLAVE.
Do not connect a DMX controller to the master or slave products.
The master unit should be the first unit in the DMX daisy chain.
Display Mode
1. Go to MENU > INTRO > DISPLAY.
2. Select a display mode (60 CLOSE or BRIGHT).
When in the “60 CLOSE” setting, the LCD’s backlight will turn off after 60 s.
When in the “BRIGHT” setting, the LCD’s backlight will stay on.
Software Version
1. Go to MENU > INTRO > INFO.
2. The display will show Edition.
3. Press <ENTER> to see the installed software version.