Casio px-330 Video Game Keyboard User Manual


 
E-50
Using a Memory Card
One of the error messages below appears on the display when a problem occurs.
All mentions of “memory card” in the following table refer to an SD memory card.
Error Messages
Display
Message
Cause Required Action
Convert There is not enough Digital Piano memory available to
convert a recorder song (page E-34) to SMF data and store
it on the memory card.
Reduce the size of the recorder song data by deleting unneeded
tracks (page E-37), if there are any.
Format 1. The current memory card format is not compatible
with this Digital Piano.
1. Format the memory card on the Digital Piano (page E-45).
2. The memory card capacity is greater than 2GB. 2. Use a memory card with a capacity of 2GB or less.
3. There is something wrong with the memory card. 3. Use a different memory card.
MediaFull 1. There is not enough room available on the memory
card.
1. Delete some of the files on the memory card to make room for
new data (page E-47), or use a different card.
2. There is not enough room available in Digital Piano
memory.
2. Delete some or all user data from Digital Piano memory to make
room for new data.
Media R/W 1. Memory card data is corrupted. 1. Use a different memory card.
2. Digital Piano memory is corrupted. 2. Back-up Digital Piano memory data by copying it to your
computer, and then turn the Digital Piano off and then back on
again.
Note that you may not be able to back-up Digital Piano data
in certain cases.
No Card 1. The memory card is not loaded correctly in the Digital
Piano’s memory card slot.
1. Correctly load the memory card into the memory card slot.
2. The memory card was removed while some operation
was in progress.
2. Do not remove the memory card while any operation is in
progress.
No Data You tried to save a Digital Piano user area (user rhythm,
user rhythm song, etc.) that does not contain any data to
the memory card.
Select a user area that contains data.
No File 1. There is no MUSICDAT folder (page E-46) on the
memory card.
1. Create a MUSICDAT folder on the memory card or format the
memory card on the Digital Piano (page E-45).
2. There is no loadable or playable data in the
MUSICDAT folder, or there is no playable data in a
song playback folder (MUSIC__B, etc.)
2. Move the file you want to load or play into the memory card’s
MUSICDAT folder. For song playback, you can place the song
data into any one of the following folders: MUSIC__B,
MUSIC__C, or MUSIC__D.
Not SMF01 You are attempting to play back SMF Format 2 song data. This Digital Piano supports playback of SMF Format 0 or Format 1
only.
Protect The memory card is write-protected. Use the memory card’s write protect switch to enable writing.
ReadOnly A read-only file with the same name you are trying to use
is already stored on the memory card.
Use a different name to save the new file.
Remove the read-only attribute from the existing file and
overwrite it with the new file.
Use a different memory card.
SizeOver 1. The data on the memory card is too big to play. 1. This Digital Piano supports playback of song data files with a
maximum size of about 320 kbytes.
2. The data you are trying to load is too large. 2. The following is the maximum data size (per data item) when
loading data into Digital Piano memory.
User rhythm: Approximately 40KB
User Song: 320KB
User Music Preset: Approximately 8KB
WrongDat 1. The memory card data is corrupted.
2. The memory card contains data that is not supported
by this Digital Piano.