Filter
Top Products
English
Recording Your Keyboard Play
E-37
You can use the procedures below to delete an entire
recorder song or to delete a specific track of a recorder
song.
Deleting a Recorder Song
1.
Use the
9
(RECORDER) button to cycle
through the recorder modes until the
RECORDER lamp is lit (playback mode).
2.
While holding down the
bs
(FUNCTION)
button, press the
9
(RECORDER) button.
This displays the recorder song selection screen.
3.
Use the
bt
(w, q) buttons to select the
recorder song you want to delete.
4.
Hold down the
9
(RECORDER) button until
the message “Sure?” appears on the display.
5.
Press the
bt
(YES) button to delete the
recorder song.
• To cancel the delete operation, press the
bt
(NO)
button.
Deleting a Recorder Song Track
1.
Perform steps 1 through 3 of the procedure
under “Deleting a Recorder Song” to select
the recorder song that contains the track you
want to delete.
2.
Press the
dk
(i) button.
This displays the track selection screen.
3.
Use the
bt
(w, q) buttons to select the
track you want to delete.
4.
Hold down the
9
(RECORDER) button until
the message “Sure?” appears on the display.
5.
Press the
bt
(YES) button to delete the track.
• To cancel the delete operation, press the
bt
(NO)
button.
You can use punch-in recording to re-record a specific
part of recorder song that you want to improve or
correct.
1.
Turn on the recorder, enter the record mode,
and select the track that contains the section
you want to re-record.
• See step 3 under “Recording to a Specific Track
(Part)” (page E-35).
2.
Hold down the
9
(RECORDER) button until
the punch-in recording screen appears on the
display.
3.
Press the
6
(START/STOP) button.
This will start playback of the selected track.
4.
When playback reaches the point you want to
re-record, play the notes and perform the
other operations you want.
This automatically starts punch-in recording, which
will continue until step 5, below.
• Any one of the following also will start punch-in
recording: a pedal or pitch bend wheel operation;
pressing the
9
(RECORDER) button;
*1
changing the
tone setting; changing the rhythm, or tempo setting
*2
• You can perform
3
(REW),
4
(FF), and
5
(PAUSE)
button operations during punch-in playback to jump
more quickly to the section you want to re-record.
Deleting Recorder Data
Lit: Playback mode
Re-recording Part of a
Recorder Song
(Punch-in Recording)
*1 Press
9
(RECORDER) when you want to start
punch-in recording without note input or a setting
change.
*2
System track only
Mistake
Playback
Use punch-in
recording to re-record
only this part.