Filter
Top Products
English
Using Built-in Tones
E-13
1.
Press the
cs
(REVERB) button to toggle
reverb on and off.
Selecting the Reverb Type
You can select from among the following four types of
reverb.
1: Room
2: Hall
3: Large Hall
4: Stadium
1.
Hold down the
cs
(REVERB) button until the
reverb type selection screen shown below
appears on the display.
2.
Use the
bt
(w, q) buttons to select the
reverb type you want.
3.
Press the
cs
(REVERB) button to exit the
reverb type screen.
1.
Press the
ct
(CHORUS) button to toggle
chorus (which adds depth to a tone) on and
off.
Selecting the Chorus Type
You can select from among the following four chorus
types.
1: LightChorus
2: Chorus
3: Deep Chorus
4: Flanger
1.
Hold down the
ct
(CHORUS) button until the
chorus type selection screen shown below
appears on the display.
2.
Use the
bt
(w, q) buttons to select the
chorus type you want.
3.
Press the
ct
(CHORUS) button to exit the
chorus type screen.
Adding Reverb to the Tone
Lit when on
Adding the Chorus Effect to
the Tone
Lit when on