Casio px-330 Video Game Keyboard User Manual


 
E-36
Recording Your Keyboard Play
Supported Track Data
The following describes the data that can be recorded
to each type of track.
System Track, Tracks 01 through 16
Keyboard notes, keyboard tone setting (main), pedal
and pitch bend wheel operation
System Track only
Layer, split, octave shift, reverb, chorus, keyboard
temperament, tempo, Auto Accompaniment play, auto
harmonize, one-touch preset, Music Preset,
*1
registration
*1*2
1.
Record the first part to the system track.
Use the procedure under “Recording or Playing Back
a Single Song” (page E-34) or “Recording or Playing
Back Multiple Songs” (page E-35) to record to the
system track.
2.
Use the
9
(RECORDER) button to cycle
through the recorder modes until the
RECORDER lamp is flashing (record mode).
3.
While holding down the
bs
(FUNCTION)
button, press the
9
(RECORDER) button.
This displays the track selection screen.
Use the
bt
(
w
,
q
) button to select the track you
want to record next (T01 through T16).
After selecting a track, press the
cs
(EXIT) button to
exit the track selection screen.
4.
Select the tone of the part you want to record
to the track.
5.
Press the
6
(START/STOP) button.
This will start playback of what you recorded to the
system track and start recording to the currently
selected track. Play what you want to record to the
current track along with the playback from the system
track.
6.
To stop recording, press the
6
(START/
STOP) button again.
This enters the playback mode. Press the
6
(START/
STOP) button again to play back the track you just
recorded. Each press of
6
(START/STOP) starts and
stops playback.
You can use the following procedure to turn specific
tracks on (play enabled) and off (play disabled). This
allows you to listen only to the track(s) you want
when recording a new track.
7.
Repeat steps 2 through 6 as required to
record all of the tracks you want.
*1 Recall only
*2 The Auto Accompaniment volume level and
transpose setting of the recalled data is not included
in the recording.
Track Name Display
System Track Sys
Tracks 01 through 16 T01 through T16
Flashing: Record mode
(1) While holding down the
bs
(FUNCTION)
button, press the
9
(RECORDER) button.
This displays the song selection screen.
(2) Press the
dk
(i) button once.
This displays the track on/off screen.
(3) Use the
bt
(w, q) buttons to select the track
you want, and then press the
dl
(ENTER) button
to toggle it on or off.