Filter
Top Products
E-40
Other Settings
You can use the settings in this section to adjust the
tuning and touch of the keyboard, to configure pedal
and MIDI settings, and to configure other parameters
in order to tailor Digital Piano operation to your
particular needs.
1.
Press the
bs
(FUNCTION) button.
The FUNCTION lamp will light and the function screen
will appear on the display. (See table below.)
2.
Use the
ct
(u) and
dk
(i) buttons to select
one of the parameters (1 through 8) shown in
the table below.
• Parameters 4 through 8 actually are parameter
groups. After selecting a group, press the
dl
(ENTER) button, and then use buttons
ct
(u) and
dk
(i) to select the parameter you want.
• Short cut buttons also are available for accessing a
parameter directly after you press the
bs
(FUNCTION) button, without going through the
menu. See the “Shortcut Button” column in the table
below for the applicable shortcut button of each
parameter.
3.
Use the
bt
(w, q) buttons to change the
setting of the currently selected parameter.
• To return to the function screen, press the
cs
(EXIT)
or
bs
(FUNCTION) button.
NOTE
• Holding down the
bs
(FUNCTION) button while
you press the
bt
(w, q) buttons in step 3 will
scroll the setting in steps of 10.
• You also can use the
bs
(FUNCTION) button for
faster scrolling while changing the tone number,
rhythm number, and other scrollable settings.
• Keep the
bs
(FUNCTION) button depressed
while pressing a
bt
(w, q) button for high-
speed scrolling. Releasing the
bs
(FUNCTION)
button first can result in another unintended
setting being changed.
dki
ctubsFUNCTION
btw, q
Configuring Settings
Parameter or group Setting