Filter
Top Products
Using the Vanguard Multiport Software
5-4 Vanguard Multiport 4520CP Controller User’s Guide
TABLE 8. mset Options
mset Option Description
-<baud_rate> Sets BAUD rate for given port.
-baud <baud_rate> Sets BAUD rate for given port.
-dtrflow Configures the driver to use DTR (pin 20) as the
input hardware flow control pin. The DTR pin will
function like RTS (pin 4). The RTS pin switches its
function to act like DTR. (Not available in ASE
driver)
ext Sets [port BAUD rate to external clock.
-flush Resets a hung port.
-rtsflow Configures driver to use RTS (pin 4) as the input
hardware flow control pin (see -dtrflow above).
(Not available in ASE driver)
-show Reports the current settings of the custom baud rate,
input hardware flow control pin, and close timeout
for the specified port.
-stats Reports error statistics for the specified asynchro-
nous port.
Note: -statsr reports the same information as -stats
and additionally resets each field to zero.
-statschk Reports a list of board/port numbers that have
detected receiver overruns, frame errors, parity
errors, or dropped characters.
-statsreset Resets all errors and statistics for all ports.
-std Sets port Baud rate to 38400 bps.
-timeout Sets the time that the driver will wait during a close
before forcing the close to complete if the close is
waiting on transmit data. The default time is 15 sec-
onds.