Filter
Top Products
Installing the Hardware and Software 19
Connecting analog VGA Monitors to DVI connectors
If the data cable connector on your VGA monitor does not fit
into the DVI connector on the card, use the DVI-to-VGA
adapters provided with your FireGL card..
Setting the Monitor Impedance
If you can switch the impedance values on your monitor, use the
following recommended settings:
• RGB video input: 75 Ohm
• Sync: 2.2 kOhm
Try other 'Sync' settings if you cannot achieve a stable video
image.
If the impedance setting options are 'High' and 'Low' only, try
the setting that provides the most satisfactory monitor display.
a Monitor cable c VGA connector from monitor
b DVI connector on card d DVI-to-VGA adapter