Filter
Top Products
18 Installing the Hardware and Software
Connecting the Cables and Completing the Installation
Connecting the Monitor Cables
You may connect one or two monitors, either DFP/digital CRT
or analog VGA to the FireGL™ card. Use the provided DVI-to-
VGA adapters to connect monitors with VGA connector.
Securely attach the data cable of your first monitor to the DVI
output connector (1) on the card. Attach the cable to the monitor
according to the monitor's instructions. Refer to the
documentation that came with your monitor if you need
additional installation information.
Connect the data cable of your second monitor to the DVI
output connector (2) on the card.
If you connect only one monitor, make sure to
connect it to DVI connector (1) on the card.
i