Filter
Top Products
Connecting to RMHost
ARM DUI 0137A Copyright © 2000 ARM Limited. All rights reserved.. All rights reserved. 211
2.2 AXD connection messages
When you connect the debugger to RMHost, messages are displayed in the RDI Log
window of AXD, as shown in Example 2-1.
If you are using a debugger other than AXD, see the documentation that accompanies
your debugger for details on where information is displayed when you connect to a new
target.
Example 2-1 Example of RMHost connection messages
ARM RMHost 1.0 (ARM Ltd. RM1.0) [XXX]
ARM Multi-ICE Release 2.0. Copyright (c) ARM Limited 1998-2000.
Connected to TAP 0, ARM966E-S on Server "localhost", Little-Endian target.
ARM RMTarget A2.0 (ARM Ltd)
ARM RDI 1.5.1 -> ASYNC RDI Protocol Converter v1.1.Copyright (c) ARM Limited 2000.
The five lines of information shown in Example 2-1 indicate the following:
Line 1 The product name and version of RMHost, where
XXX
is the three-digit
build number. You must quote this number when reporting any problems
with RMHost.
Lines 2 and 3
Information that is specific to the JTAG unit, in this case Multi-ICE.
Line 4 The product name of RMTarget and version number of the RealMonitor
protocol. The supplier for the target is also shown, which is decoded from
the character at the start of the version number. Currently, the only
supported supplier is ARM Ltd., as indicated by
A
.
Line 5 Generated by AXD. If you have enabled the RDI module server, some
additional module-specific information might be displayed.