Filter
Top Products
Connecting to RMHost
24 Copyright © 2000 ARM Limited. All rights reserved.. All rights reserved. ARM DUI 0137A
Note
If Load Image is disabled, you must stop the currently running application by
selecting Stop from the Execute menu.
The image might stop at
main()
if the program contains this function. In this case,
select Go from the Execute menu to continue from the breakpoint.
3. While your program is running, configure the interface as follows:
a. Select Configure Interface from the Options menu.
b. Select the General tab.
c. In the Target connection drop-down menu, select the option
ATTACH:
Connect according to target properties
, as shown in Figure 2-2. Click
OK.
Figure 2-2 Configure interface dialog box
4. Select the RealMonitor target as follows:
a. Select Configure Target from the Options menu. The Choose Target
dialog box is displayed.
b. Select
RealMonitor.dll
as the target DLL, as shown in Figure 2-3 on
page 25.