Filter
Top Products
Connecting to RMHost
ARM DUI 0137A Copyright © 2000 ARM Limited. All rights reserved.. All rights reserved. 25
If not present in the list, click Add and select
RealMonitor.dll
from the
Bin
directory of the ADS installation. (If DLL files do not appear, use Windows
Explorer to ensure that files of extension
.dll
are not hidden from view.)
The Choose Target dialog box is redisplayed.
When you select
RealMonitor.dll
, AXD displays the following message:
Connect the ARM Debugger to a target board using a unit such as Multi-ICE.
Boards require RMTarget software.
Step 5 describes how to do this.
Figure 2-3 Choose Target dialog box
5. Click Configure. The RealMonitor Configuration dialog box is displayed, an
example of which is shown in Figure 2-4 on page 26.
Note
If you have previously configured RMHost using the RealMonitor Configuration
dialog box, you need to repeat the configuration process only if the configuration
details have changed. If no details have changed, you can proceed to step 10.