Filter
Top Products
Connecting to RMHost
ARM DUI 0137A Copyright © 2000 ARM Limited. All rights reserved.. All rights reserved. 23
To use RMHost with a RealMonitor-enabled image:
1. Start AXD, and configure the target as follows:
a. Select Configure Target from the Options menu. The Choose Target
dialog box is displayed.
b. Select a supported JTAG unit DLL, such as
Multi-ICE.dll
version 2.0, in
the Choose Target window, as shown in Figure 2-1. If this is not present in
the list, click Add, and find the required DLL. (If DLL files do not appear,
use Windows Explorer to ensure that files of extension
.dll
are not hidden
from view.) The Multi-ICE DLL is found in the root directory of the
Multi-ICE installation. If you have Multi-ICE 2.0 hardware, and you have
not used Multi-ICE as a target in the past, click Configure. Otherwise, click
OK. If you are using another JTAG unit, see its accompanying
documentation for details on configuration.
Note
For details on configuring the Multi-ICE target, see the Using Multi-ICE with
Debuggers chapter of the Multi-ICE User Guide.
Figure 2-1 Selecting the Multi-ICE target
2. Load the RealMonitor-enabled image into your target board by selecting Load
Image from the File menu, and execute it by selecting Go from the Execute
menu.