A SERVICE OF

logo

AC Power Cord
Since many areas of the world have specific power requirements, an AC power cord
may not be included with your printer. The power cord must meet your local electrical
requirements.
WARNING!!! For personnel and equipment safety, always
use a three-prong plug with an earth ground connection to
the AC power source.
Power Line Cord Specifications
n
The overall length must be less than 9.8” (3.0 m).
n
It must be rated for at least 5A, 250 VAC.
n
The chassis ground (earth) MUST be connected to assure safety and reduce
electromagnetic interference. The ground connection is handled by the third wire
(earth) in the power cord (see Figure 33).
n
The AC power plug and IEC 320 connector must bear the certification mark of at
least one of the known international safety organizations shown in Figure 34.
Zebra Z4M Printer User’s Guide 83
AC power
plug for
your country
3 conductor
<HAR> cable
IEC 320
connector
Contac
t
view
Neutral
Live
Earth
Figure 33
+
R
Figure 34