A SERVICE OF

logo

Network Configuration Worksheets
A-8
8000-A2-GB21-30April 1998
Configure DSL IP Addr Screen A-G-A
Prompt Your Configuration Setting
1. Enter the DSL card subnet mask at
the (nnn.nnn.nnn.nnn):
prompt.
This must be the same as the
subnet mask for the backplane
(s1b) management subnet.
DSL Card Subnet Mask =
(Read-only in future release.)
2. Enter the IP address for each DSL
card in the system. Select the
appropriate slot number by using
the arrow keys to move from one
field to another.
Once the slot number is selected,
enter the IP address for that DSL
card at the (nnn.nnn.nnn.nnn):
prompt.
Slot 1 IP Address =
Slot 2 IP Address =
Slot 3 IP Address =
Slot 4 IP Address =
Slot 5 IP Address =
Slot 6 IP Address =
Slot 7 IP Address =
Slot 8 IP Address =
Slot 9 IP Address =
Slot 10 IP Address =
Slot 11 IP Address =
Slot 12 IP Address =
Slot 13 IP Address =
Slot 14 IP Address =
Slot 15 IP Address =
Slot 16 IP Address =
Slot 17 IP Address =
Slot 18 IP Address =