Network Configuration Worksheets
A-20
8000-A2-GB21-30April 1998
TASK 3: Create a Default Route or Source Route
On the Static Routes screen, create a default route or source route for each DSL
card (upstream direction). If creating a default route, fill out one worksheet. If
creating source routing, complete one worksheet per domain (up to 16 domains;
four domains per port).
Access the . . .
By . . .
Static Routes screen
Selecting
Configuration
→
IP Router
→
Static
Routes
from the Hotwire – DSL menu.
Static Routes Screen A-E-A
Prompt Your Configuration Setting
1. Enter 0 or press Return at the Item
Number (0 to add new
record): prompt to add a new
record.
2. Do
one
of the following:
– To create a default route, enter
0.0.0.0 at the Destination (or
space to delete route):
prompt, or
– To create a source route, enter the
source route address at the
Destination (or space to
delete route): prompt.
Host/Net =
