A SERVICE OF

logo

Open as PDF
next previous
Network Configuration Worksheets
A-12
8000-A2-GB21-30April 1998
TASK 7: (When Using an 8546 DSL Card) Configure the Hotwire 5446
RTU Management Domain IP Addresses
On the IP Network screen, configure the Hotwire 5446 RTU IP addresses on
each 8546 DSL card, which are the RTU’s management domain IP addresses.
Access the . . .
By . . .
IP Network screen
Selecting
Configuration
→
Interfaces
→
IP Network
from the Hotwire – DSL menu.
IP Network Screen A-C-B
Prompt Your Configuration Setting
For DSL port 1 (s1c):
1. Enter the interface name at the Input
Interface Name: prompt.
IP Interface = s1c
2. Enter the port 1 5446 RTU’s IP
address or the IP address of the router
connected to the 5546 RTU at the
(nnn) prompt.
Peer IP Address =
3. Enter route type HOST at the Route
to peer (host/net): prompt.
Route to Peer= HOST