A SERVICE OF

logo

Open as PDF
next previous
Network Configuration Worksheets
A-7
8000-A2-GB21-30
April 1998
TASK 4: Assign IP Addresses to the DSL Cards
On the Configure DSL IP Addr screen, assign an IP address to each DSL card in
the system.
NOTE:
If you enter two consecutive dots (.) in the IP address, the system will
interpret this as dot-zero-dot (.0.).
Access the . . .
By . . .
Configure DSL IP Addr screen
Selecting
Configuration
→
DSL Cards
→
Set IP
Address
from the Hotwire – MCC menu.