Network Configuration Worksheets
A-24
8000-A2-GB21-30April 1998
TASK 5: Configure RTU Information
On the RTU Information screen, configure RTU information only if the RTU type
is 5446r1 or 5446r2..
Access the . . .
By . . .
Configuration screen
Selecting
Configuration
→
RTU
→
Configuration
from the Hotwire – DSL menu.
RTU Configuration Screen A-H-B
Prompt Your Configuration Setting
1. Enter the interface name at the DSL
Interface Name (s1a, s1d,
s1e, or s1f): prompt.
Interface name =
2. Enter the community name at the
Community Name (up to 32
characters): prompt.
Community name =
3. Enter the Remote Service Domain
Host at the IP Host Address
(nnn.nnn.nnn.nnn or space to
delete): prompt.
Remote Serve Domain IP Host Address =
4. Enter the Subnet Mask at the
Network Subnet Mask
(nnn.nnn.nnn.nnn) prompt.
Subnet Mask =
5. Enter the Trap Manager IP Host at the
IP Host Address
(nnn.nnn.nnn.nnn or space to
delete): prompt.
Trap Manager IP Host Address=
