A SERVICE OF

logo

Open as PDF
next previous
47
Chapter 3: Menus
Auto LF after CR Off*
On
The Auto LF after CR setting determines whether the printer automatically performs a line
feed after a carriage return control command.
TRAY RENUMBER Assign MP Feeder
Assign Tray 1
Assign Tray 2
Assign Tray 3
Assign Man Paper
Assign Man Env
Off*
0…199
VIEW FACTORY DEF
MPF Default = 8
T1 Default = 1
T2 Default = 4
T3 Default = 5
MPap Default = 2
MEnv Default = 3
Restore Defaults
Ye s
No
The Tray Renumber menu item provides software compatibility with other printers. This may
be helpful if you have print jobs or applications previously set up for other printers.
For example, if you want to use a different printer driver with your printer and have optional
drawers installed, use the Tray Renumber menu item to set the tray values. You can then
successfully choose the correct paper source with the different printer driver.
Refer to the
Technical Reference
for more information about assigning source numbers.
PCL Emul Menu (continued)
Menu item Values
*Factory default