123
Chapter 7: Replacing print cartridges
10 Lift the print cartridge from the carousel.
Warning!
Do not handle the
cartridge by the photoconductor
or shutter assembly.
11 Remove the appropriate print cartridge from the
packing material.
Do not touch the glossy green surface under the
shutter, it is the photoconductor and may become
damaged.
Do not expose the photoconductor to light for more
than 10 minutes. If you need more time to install the
print cartridges, cover the photoconductor to pro-
tect it from direct light.
12 Remove the orange tabs and any packing material
or tape from the print cartridge.
There are two orange tabs, one on each side of
the print cartridge.
Pull the orange tabs away from the print car-
tridge to remove them.
Shutter and photoconductor
