Configuration Using The Printer Control Panel
63
8. Press the LEFT or RIGHT arrow key to select the portion of the IP
Address to be changed.
9. Press the DOWN arrow key.
10. Press the LEFT or RIGHT arrow key to select the desired value.
11. Press the ENTER key to make the selection. An asterisk appears to the
right of the value.
12. Press the UP arrow key and you will be returned to step 8. When you are
finished changing parameters, exit the configuration menus and lock the
ENTER key. (For instructions, refer to “Locking And Unlocking The
ENTER Key” on page 42.)
Caution When a change is made from the control panel, the LineJet Print
Server is re-initialized. The messages “E-NET RESET” and “E-NET
INIT” display on the control panel. This process takes several
minutes. Make sure not to shut the printer off or make further
changes to the LineJet Print Server settings during this initialization
period to prevent a loss of LineJet Print Server configuration
information. When the initialization is complete, the message
“E-NET READY” will display.
