Filter
Top Products
28
CHANGING VOLUME LOCK ( continued)
To Change Volume Lock to the Audio Mode:
NOTE:Performing these steps will allow you to access the volume
control of your audio component in all modes.
1. On the Millennium 4,press and hold SETUP
until the LED blinks twice,then release SETUP.
2. Enter 9 - 9 - 3 and then press AUDIO once. The
LED will blink twice.
3. Now, whenever you press press VOL+,VOL-,or
MUTE on the Millennium 4,volume will be
controlled by your audio component.
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 28