Filter
Top Products
PROGRAMMING AUDIO CONTROL
Setup Codes for Audio Amplifiers (continued):
Victor 0074
Wards 0014, 0054
Yamaha 0176, 1176,0186
Yorx 0195
Zenith 0857
SEARCHING FOR YOUR CODE
If your TV,VCR or DVD Player,Cable Converter,or Audio
Component does not respond to the Millennium 4 after
trying all of the codes listed for your brand,or if your
brand is not listed at all, try searching for your code.
For example,to search for a code for your TV:
1. Turn on your TV.
2. On the Millennium 4,press and hold SETUP
until the LED blinks twice,then release SETUP.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the the TV and slowly
alternate between pressing POWER and TV.
Stop when the TV turns off.
NOTE:In the search mode,the Millennium 4 will
send IR codes from its library to the selected compo-
nent,starting with the most popular code first.
5. Press SETUP once to lock in the code.
6. To search for the codes of your other
components,repeat steps 1 through 5,but
substitute the appropriate key (i.e.,VCR,CBL,
or AUDIO) for the (VCR or DVD,Cable,or
Audio) component you are searching for.
24
Millennium 4 Mnl M4092 rev 1/22/03 9:38 AM Page 24